一、承担科研项目情况
主持国家自然科学基金、军科委、某军装备部重点项目，以及航天、兵器等企事业单位科研项目多项，科研总经费1000余万元。
（学生科研任务源于国家长期纵向资助项目，保障学生专注某一科研方向持续、深入的研究）
二、近年来主要发表论文
[1]Yi Wu, Zixiang Zhang, Qianlong Wang*, Ningfei Wang，“Combustion characteristics of 3D-printed skeleton polymer reinforced paraffin-wax fuel grain in swirl/straight oxygen flow: applications in hybrid rocket motors” Combustion and Flame 2021, Under Review.
[2]Yi WU*，Zixiang ZHANG, Fuwen Liang, Ningfei Wang “Combustion characterization of a CH4/O2 rapid mixed swirl torch igniter for hybrid rocket motor”, Aerospace Science and Technology, 2020.03
[3]Qianlong Wang, Liqiao Jiang, Weiwei Cai, Yi WU(通讯作者)，“Study of UV Rayleigh scattering thermometry for flame temperature field measurement”， Journal of the Optical Society of America B. 2019.10
[4]Yi. Wu, X. Yu∗, X. Lin , S. Li, X. Wei, C. Zhu , L. Wu “Experimental investigation of fuel composition and mix-enhancer effects on the performance of paraffin-based hybrid rocket motors”, Aerospace Science and Technology 82–83 (2018) 620–627, 2018
[5]Yi. Wu*, V. Modica, X. Yu and F. Grisch, ‘’Experimental investigation of laminar flame speed measurement for kerosene fuels: Jet A-1, Surrogate fuel and its pure components ‘’ Energy & Fuel, 2018, 32 (2), pp 2332–2343.
[6]Yi. Wu*, V. Modica, B. Rossow, X. Yu, L. WU and F. Grisch, ‘’Laminar flame speed of lignocellulosic biomass-derived oxygenates and blends of gasoline/oxygenates’’ Fuel, vol. 202, pp. 572-582, 2017
[7]Yi. Wu*, V. Modica, X. Yu, F. Li. and F. Grisch “Effects of optical diagnostic techniques on the accuracy of laminar flame speeds measured from Bunsen flames: OH* chemiluminescence, OH-PLIF and acetone/kerosene-PLIF” Measurement Science and Technology, vol. 29, No.1, 2017
[8]Yi. Wu*, V. Modica, B. Rossow and F. Grisch, “Effects of pressure and preheating temperature on the laminar flame speed of methane/air and acetone/air mixtures’’ Fuel, vol. 185, pp. 577-588, 2016.
[9]K. Wang, F. Li*, Yi. Wu and X. Yu, Quantitative measurements of chemiluminescence in a laminar methane-air premixed flame and comparison with numerical methods’’, Energy & Fuels 32, 4, 5536-5543, 2018
[10]张子相，武毅（通讯作者），卢健程，杨钧森，王一尧，王宁飞 “3D打印骨架增强石蜡燃料燃烧机理实验研究”，推进技术，2021.（EI）
[11]张子相，梁福文，武毅（通讯作者），王宁飞，“切向高旋流CH4/O2点火器火焰特性研究”,中国工程热物理学会燃烧学学术会议，2019.
[12]张子相，武毅(通讯作者)，张广龙，张文昊，王宁飞,“燃烧室构型对固液混合发动机燃烧性能影响的数值模拟与实验研究”，第二届空天推进技术论坛，2019.
[13]张子相，武毅（通讯作者），杨钧森，张一飞,王宁飞，“三孔撞击式喷嘴撞击雾化仿真研究”
中国工程热物理学会燃烧学学术会议，2020.
[14]王一尧，武毅(通讯作者)，颜密，王宁飞,“固体火箭发动机热安全性的尺寸效应数值仿真研究”第四届空天推进技术论坛，2021.
[15]文俊杰, 武毅(通讯作者), 周东谟, 刘向阳, 颜密, 王宁飞“高温下碳纤维增强树脂基复合材料（CFRP）壳体结构损伤及强度影响分析”第四届空天推进技术论坛，2021.
[16]杨钧森，武毅(通讯作者)，文俊杰,王宁飞,“某型固体火箭发动机高低温点火条件下结构完整性数值仿真研究”,第四届空天推进技术论坛，2021.
[17]张子相，武毅(通讯作者)，杨钧森，章帆，王宁飞,“聚合物骨架增强石蜡燃料燃烧过程的数值仿真研究”，第四届空天推进技术论坛，2021.
[18]Yi. Wu*, V. Modica, B. Rossow, F. Grisch “Elevated pressure and temperature effect to laminar flame speed of acetone/air mixture’’ 25th International Colloquium on the Dynamics of Explosions and Reaction System, Leeds, 2015 (会议Proceeding)
[19]Yi. Wu*, V. Modica, F. Grisch “Laminar flame speed measurement of multicomponent Jet A-1 and LUCHE kerosene surrogate fuels in elevated pressure and temperature conditions’’ 7th European combustion meeting, Budapest, 2015 (会议Proceeding)
[20]Yi. Wu*, V. Modica, B. Rossow, F. Grisch “Mesure de la vitesse de la flamme laminaire pour des combustible multi composants’’ 14th congrès francophone sur les techniques lasers pour la mécanique des fluides, Marseille, 2014 (会议Proceeding)
三、教学任务
主讲本科生课程《火箭燃气动力学II》-32学时，《燃烧与传热学II》-32学时
主讲研究生课程《组合发动机技术》-32学时
